Our Office
Areas We Cover

We provide same day free coverage for all of GTA.  Upon request we also service all of Canada.

Quebec

New Brunswick

 

Nova Scotia

Nunavut

Manitoba

Saskatchewan

Alberta

 

British Columbia

68 Railside Road, Suite F
North York, Ontario M3A 1A3, Canada

​© 2019 by Brickeye. 

BrickeyeFrog png500.png
BrickeyeDog.png
BrickeyeCanary.png
BrickeyeEagle.png
BrickeyeParrot.png

0-20 mA Current Meter

The wireless 0-20 mA Current Meter is capable of measuring the current off another device or sensor up to 20mA VDC.

Applications:

• Current transducers

• Third-party sensor reading

0-1.2 VDC Voltage Meter

The wireless Voltage Meter can interface with other  devices to measure voltage up to 1.2 VDC.

Applications:

• Strain gauges

• Pressure transducers

• Thermocouples

500 VAC/VDC Voltage Meter

The wireless 500 VAC/VDC Voltage Meter is an analog measuring device that reports the measured voltage on user specified intervals. The sensor has three operating modes, in which you can obtain the voltage measurement in VACrms (root mean squared), the peak voltage, or the DC voltage. The modes can be set by the user; the default mode measures VACrms.

Applications:

• Power Lines

• Machinery

• Electrical Motors

• Generators

0-50 VDC Voltage Meter

The wireless Voltage Meter measures the voltage between two electrical points. It can be connected to the power and ground of any voltage source and measure within stated accuracy up to 50 VDC. Perfect for measuring battery voltage at specified intervals where sensor data will be wirelessly sent to Brickeye's online sensor monitoring system.

Applications:

• Truck Battery Monitoring

• Heavy Equipment Battery Monitoring

• Car Battery Monitoring

0-1 mA Current Meter

The wireless 0-1 mA DC Current Meter is designed to work with the Flex-Core MCT5 current transducer that converts 5 Amps AC into a DC signal up to 1 mA. (Additionally a current transformer (CT) can be used to interface the MCT5 to higher amperage systems.) Measures current up to 1 mA DC.

Applications:

• Current transducers.

• Third-party sensor monitoring

AC Voltage Detector

The wireless AC voltage detection sensor can interface with other devices to detect voltage from 24 VAC to 500 VAC. The sensor notifies of the presence or absence of voltage. It is intended for use on power sources or power supplies up to 500 VAC. Not intended for voltages higher than 600 VAC and also not intended for use with DC sources without permission.

Applications:

• Sprinkler & HVAC Systems

• Important Appliances

• Electrical Sources

• Power Couplings

• Line Power

• Sump Pump

0-5 Volt Meter

The wireless Voltage Meter measures the voltage between two electrical points. It can be connected to the power and ground of any voltage source and measure within stated accuracy up to 5 VDC. It can be connected to any kind of variable voltage device, such as a transducer or sensor that outputs voltage. If the device to be measured is passive, the user must supply their own excitation voltage to the device.

Applications:

• Battery Health

• Voltage Measurement

• Transducer Measurement

• Machinery

• Electrical Motors

0-10 Volt Meter

The wireless Voltage Meter measures the voltage between two electrical points. It can be connected to the power and ground of any voltage source and measure within stated accuracy up to 10 VDC. The sensor can be connected to any kind of variable voltage device, such as a transducer or sensor that outputs voltage. If the device to be measured is passive, the user must supply their own excitation voltage to the device.  

Applications:

• Battery Health

• Voltage Measurement

• Transducer Measurement

• Machinery

• Electrical Motors

DC Voltage Detector

Brickeye’s industrial wireless DC Voltage Detection Sensor detects the presence or absence of electricity. This device is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC  Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage absence and vice versa. The data is displayed as “Voltage Detected” or “No Voltage”.  

Applications:

• Battery Power and Adapters

• Relays/Switches

• Appliances and Sump Pumps

• Solar Equipment

• Power Supplies

AC Current Meter

The wireless AC Current Meter measures the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the “hot” wire of a two wire (hot, common, ground(optional)) power system. The sensor will report the Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the Brickeye system. The online Brickeye system is capable of generating watt hour or kilowatt hour readings as well.

Applications:

• Current Monitoring

• Current Usage

• Amperage Monitoring

• Amp Hour Meter

Three Phase Current Meter

The wireless Three Phase Current Meter measures the RMS current of an alternating current (AC) system using 3 current transformers (CTs) that wrap around the wires of a three phase power system. The sensor reports Minimum RMS current, Maximum RMS current, Average RMS current, and duty cycle for each phase and the combined amp hours of all three phases to the Brickeye system. The Brickeye system is capable of generating watt hour or kilowatt hour readings as well based on a user specified RMS voltage.

Applications:

• Current monitoring

• Current usage

• Amperage monitoring

• Amp hour meter